Holeshot Performance Products, Inc.

Dale's Adjustable Bandit 1250 struts are a easy bolt on. These will either raise the bike 1.25" or lower it 1.0"

Raising the back will quicken up the steering a bit for the canyon carver, plus adds ground clearance. Lowering the back makes it more flat footed for the shorter rider when coming to a stop, and also makes for much harder drag strip type launches if you like to play at the track.

The Holeshot 1250 struts can be installed in under one hour with normal hand tools, click here for installation tip photos.

They are precision laser cut from 1018 steel so strength is not an issue. The super tough finish is a beautiful laser black powder coat with a slight metallic silver added.

Disclaimer
All Holeshot Performance Products are intended for closed course racing purposes only, never to be used on any road or highway anywhere in the world. Many of our products are illegal on pollution controlled vehicles so installing them is at the sole discretion of the buyer. Be sure to check your local laws. Holeshot Performance Products is not responsible for any engine damage that may occur from improper installation of any of its products. Holeshot Performance Products, Inc. ® is a trademark of Holeshot Performance. Any other product names are the trademarks of their respective holders. All rights to use this publication are exclusively owned by, and proprietary to, Holeshot Performance Products, Inc. No part of this publication or web site may be reproduced or transmitted in any form or by any means, electronic or mechanical, without first obtaining written permission from the publisher.

Holeshot 1250 Bandit adjustable struts
Part No. B-AS	$64.95 per set