Holeshot Bandit 1250 4-2-1 Stainless Header System

Click image to enlarge

After nearly a year of dyno, road and track testing, Dale's Holeshot Bandit 1250  4-2-1 Header is now ready to rock and roll. Its constructed from the finest 304 air craft grade american stainless steel. After polishing, each 1250 header is hand crafted in house by Dale's brother in Law Paul McCain. All welds are precision tig, not high production mig welds. The Holeshot 4-2-1 header offers good oil and filter access, excellent ground clearance, drops about 12 lbs when replacing the front section only, and up to nearly 20 lbs with our full system. At this time Dale has over 420 dyno pulls on his own 1250, testing and tuning each combination to perfection, with 250+ pulls on his header development, and his stage 2 tune up alone. You can expect amazing power and torque gains with the complete Holeshot header system and Dale's stage 2 TFI tuning. 

The Holeshot Bandit 1250  4-2-1 front header section is sold separately, and will mate up with all of our Holeshot Slip-ons. Obviously Dale's slip-on will offer the best fit and overall performance gains along with, but The Holeshot 1250 header will also mate up to any other brand X slip-on as well.


Note!  The factory accessory lower faring may need to be slightly trimmed to clear the 1250 Holeshot header, and it may or may not fit the 650 F. As of now, we have not had a chance to try these combinations.

Dyno charts To view Dyno Charts Click here

Click images to enlarge
Holeshot Bandit 1250 4-2-1 Stainless Header System
Description Part No. Price
1250  4-2-1 Header B1250-421H
$650.00
Exhaust gaskets B1250-EXG
$6.00 ea.

Valco All-In-One High Temp Silicone

Valco All-In-One High Temp Black Silicone is ideal for exhaust system slip fits during installation. It's one the most advanced sealers available, is resistant to extreme temperatures up to 600 degrees, and can be used in none high temp applications as well. This product is a necessity to use if your installing our Holeshot slip-on or complete header system.
Valco All-In-One High Temp Silicone
Part No. V-HTS $7.50

Keep your new Holeshot exhaust looking like new!

Magic Mix is known as the lazy man's polish and for a good reason. It's absolutely the best and easiest to use metal polish we've ever tested. It will keep your new Holeshot Slip-on or complete system looking new forever.

It works fantastic on aluminum, stainless, chrome and our coated slip-ons or full header system. We use it daily in our workshop during final assembly, as well as, on all our personal vehicles. It can even be used to rub out fine scratches on painted clear coated finishes.

Note: Magic Mix polish should not be used on our black header and muffler coatings.
Magic Mix Metal Polish (8 oz. bottle)
Part No. MM-P $8.95
Prices subject to change without notice

Disclaimer
All Holeshot Performance Products are intended for closed course racing purposes only, never to be used on any road or highway anywhere in the world. Many of our products are illegal on pollution controlled vehicles so installing them is at the sole discretion of the buyer. Be sure to check your local laws. Holeshot Performance Products is not responsible for any engine damage that may occur from improper installation of any of its products. Holeshot Performance Products, Inc. ® is a trademark of Holeshot Performance. Any other product names are the trademarks of their respective holders. All rights to use this publication are exclusively owned by, and proprietary to, Holeshot Performance Products, Inc. No part of this publication or web site may be reproduced or transmitted in any form or by any means, electronic or mechanical, without first obtaining written permission from the publisher.

Copyright (c) 1998-2009. All rights reserved.