Holeshot Bandit 650 / 1250 Slip-On

click on image to enlarge

Dale's Bandit 650/1250 slip-on is a real work of art. It features our polished 304 air craft stainless high flow mid pipe, stainless hardware with custom clamps and no springs. Our hand crafted in house Holeshot mufflers come either fully polished or with the satin black outer skin in 17 " or 14 " lengths. Our Holeshot Performance laser etch mark is now standard on all end caps as shown, and our logo plate can be added as an option. If you want the most power and torque go with the Comp 2 core, and also dont worry about it being to loud, because running it with the original front header its not at all. If you want super stealth then consider our street core that will only make about 1.5 to 2.0 hp less. Not only will the Holeshot 650/1250 Slip-on add performance, it will also remove nearly 9 lbs of unwanted wieght. This equals free horsepower and improved handling.

Dale did not want a ugly center stand stop bracket welded onto the mid pipe since some may remove the heavy center stand and use a rear race stand, remember this bike has swing arm spool mounts on the swing arm. Dale came up with a simple center stand rubber bump stop kit that is sold separately for those that want to keep the center stand. Click here to view installation instuctions

The 1250 will run ok with only the slip-on added and make about 4 more hp, but with Dales Stage 1 TFI tune, K&N filter and air box mod you can expect a full 9 to 10 hp gain, and up to 92 ft lbs of grunt. It will also run much smoother throughout the entire rpm range with these upgrades.

Note! New Holeshot touring slip-on to clear hard case saddle bags is now available - click here.

Note! Dale will developing a new Holeshot 4-1 full stainless front header system later this winter. All Holeshot slip-on customers will be able to upgrade at that time if desired. Dale is expecting big power gains and a huge weight reduction with this new header system. (please be patient)

Click here to view dyno charts

Click here to view TFI tuning box info

Click here to view GI Pro digital gear indicator with adjustable timing retard eliminator

Click here to view Dales 1250 video clips

Note! Permatex Ultra Copper High Temp Silicone is required when installing our exhaust systems and our polishes should also be used. See Below.

	Powder satin black muffler with optional Holeshot logo plate Click the image to enlarge The cost to have the optional logo plate installed is $5.00 per muffler.
	Polished muffler with optional Holeshot logo plate Click the image to enlarge
	Our latest super clean, laser etched Holeshot Performance muffler end cap is now standard. The silver and black Holeshot logo plate will not be on the muffler unless requested. Click the image to enlarge
	Center stand stop kit includes rubber bumper stop, 5/16-18 tap and proper size drill bit. Click here to view installation instuctions Click the image to enlarge
	An optional heat shield is also available for those who may get their heel against the mid pipe while riding. This may only be needed depending on your riding style or if you have a very large foot size. Dale recommends running the pipe a while first to determine if you need to add this or not. Click the image to enlarge

Click images to enlarge

Holeshot Bandit 650 / 1250 Slip-On
Description	Part No.	Price
17" Polished Comp 2	B50-SOP-17C2	$374.00
17" Black Comp 2	B50-SOB-17C2	$399.00
14" Polished Comp 2	B50-SOP-14C2	$374.00
14" Black Comp 2	B50-SOB-14C2	$399.00
17" Polished Street	B50-SOP-17S	$374.00
17" Black Street	B50-SOB-17S	$399.00
14" Polished Street	B50-SOP-14S	$374.00
14" Black Street	B50-SOB-14S	$399.00
Heat shield (optional)	Part No. 08-1651	$28.00
Holeshot logo plate (optional)	EX-NP	$5.00
1250 center stand stop kit	B50-CSS	$12.95

Valco All-In-One High Temp Silicone

Valco All-In-One High Temp Black Silicone is ideal for exhaust system slip fits during installation. It's one the most advanced sealers available, is resistant to extreme temperatures up to 600 degrees, and can be used in none high temp applications as well. This product is a necessity to use if your installing our Holeshot slip-on or complete header system.

Valco All-In-One High Temp Silicone
Part No. V-HTS	$7.50

Keep your new Holeshot exhaust looking like new!

Magic Mix is known as the lazy man's polish and for a good reason. It's absolutely the best and easiest to use metal polish we've ever tested. It will keep your new Holeshot Slip-on or complete system looking new forever.

It works fantastic on aluminum, stainless, chrome and our coated slip-ons or full header system. We use it daily in our workshop during final assembly, as well as, on all our personal vehicles. It can even be used to rub out fine scratches on painted clear coated finishes.

Note: Magic Mix polish should not be used on our black header and muffler coatings.

Magic Mix Metal Polish (8 oz. bottle)
Part No. MM-P	$8.95

Magic mix speed wax, to maintain our satin black mufflers and ceramic black headers.

Magic Mix Speed Wax is a quick and easy way to give painted and clear coat surfaces a super high gloss finish. It applies a thin, wax protective coating. Speed Wax is a great product to use in between your Super Glaze carnauba waxing intervals. If you are in a hurry this is the product. It works very well on our optional ceramic black header and satin black muffler coatings.

Click here to see all our detailing products.

Magic Mix Speed Wax (16 oz. bottle)
Part No. MM-SW	$10.95