Holeshot Performance Products, Inc.
Report an issue with this page...

2009+ V-Max Stage 1 Air Box Mod Install Tip Page

Note: These numbered photos and instructions are to be used as a guide to install the Stage 1 Air Box Mod Kit. Be sure to review all photos before you start the installation. Feel free to call Dale, after 3:30 pacific time, if you have any questions. (775)-463-5394

1. Remove air box filter lid & drill two 1 3/4" holes as shown

2. Do final clean up as shown


3. Remove air box and trim inlet restrictor plastic rivet heads

4. Remove inlet restrictor as shown and re-install the air box


5. Install K&N Filter as shown

6. Reinstall the air filter cover


7. This photo shows the hose pulled from the AIS. Lube and insert the rubber plug, then reinstall hose.