Report an issue with this page...
Holeshot Slip-Ons
Kawasaki Versys 1000
Dale's Versys 1000 slip-on is a real work of art. It features our polished 304 air craft stainless high flow mid-pipe, stainless hardware with custom clamps and no springs. Our hand crafted in house 14" Holeshot mufflers come either fully polished or with the high temp powder satin black outer skin in. The Comp 2 Holeshot 10" black bad boy pictured above is also a neat option, and in slip-on form is still very subtle on the Versys. Our Holeshot Performance laser etch mark is now standard on all end caps, and our logo plate can be added as an option (customer installs).
If you want the most power and torque go with the Comp 2 core, and also don't worry about it being to loud, because running it with the original front header its not at all. If you want super stealth then consider our street core that will only make about 1.5 hp to less. If you intend to add a front header section later when Dale gets to it, then he recommends the street core muffler from the get go!
Not only will the Holeshot Versys 1000 slip-on add about 3 HP and TQ, it will also remove nearly 8 lbs of unwanted weight, and runs great with the stock fueling. The weight reduction also equals free horsepower and improved handling. Dale also made sure to give the hard bags tons of clearance to the muffler, and as much heal clearance possible to the mid pipe.
For Bigfoots.........We also offer our clamp on chrome heat shield, but don't order it unless you find that you really need it.
Dale will be starting on the new Holeshot Supertune Pro dyno tune in the future, but please be patient since he is one guy and does it all. Stay Tuned!
| Description | Part # | Price |
| 14" Street Polished | V1-SOP-14S | $379.00 / each |
| 14" Street Black | V1-SOB-14S | $389.00 / each |
| 14" Comp 2 Polished | V1-SOP-14C2 | $379.00 / each |
| 14" Comp 2 Black | V1-SOB-14C2 | $389.00 / each |
| 10" Black Bad Boy | V1-SOB-10C2 | $389.00 / each |
| Heat Shield (Optional) | 08-1651 | $28.00 / each |
| Holeshot Logo Plate (Optional) | EX-NP | $5.00 / each |
These are a non-returnable item!
 | Valco All-In-One High-Temp Silicone Valco All-In-One High Temp Black Silicone is ideal for exhaust system slip fits during installation. It's one of the most advanced sealers available, is resistant to extreme temperatures up to 600 degrees, and can be used in non high temp applications as well. This product is a necessity to use if you are installing our Holeshot slip-on or complete header system.
All orders plus shipping - Prices subject to change without notice
|
 | Magic Mix Keep your new Holeshot exhaust looking like new!Magic Mix is known as the lazy man's polish and for a good reason. It's absolutely the best and easiest to use metal polish we've ever tested. It will keep your new Holeshot Slip-on or complete system looking new forever. It works fantastic on aluminum, stainless, chrome and our coated slip-ons or full header system. We use it daily in our workshop during final assembly, as well as, on all our personal vehicles. It can even be used to rub out fine scratches on painted clear coated finishes.
All orders plus shipping - Prices subject to change without notice
|
 | Original Bike Spirit Spray Cleaner & Polish Dale loves this product and often uses it around the shop here at Holeshot . It very well may be the best quick cleaner and polish on the planet. The Original Bike Spirits Spay Cleaner and Polish comes in a aerosol 14 oz. can. This product was formerly branded by Honda and other OEMs, but now is available right from the source. OBS works fantastic on Paint, windscreens, face shields, bare aluminum, chrome , even plastic, vinyl & leather. On leather riding gear it cleans off dirt and bugs without harming the pigment.
All orders plus shipping - Prices subject to change without notice
|