Report an issue with this page...
Holeshot Dyno Charts
Yamaha FZ1 (Header System & Stage 2 Jetting)
Run 123 (blue line): Holeshot complete header system with
stage 1 jetting kit (including timing advancer)
Run 182 (red line): Holeshot complete header system with
stage 2 jetting kit (including timing advancer)
The above photo shows the first chart with the weather conditions included.
The temperatures are within 6 degrees of each other. This is critical for Dale's testing to achieve true
repeatabiliy.
The above chart shows 4 dyno pulls in a row of Dale's same FZ1 with the complete Holeshot Stage 2 Jetting Kit and full 4-1 Header System installed.
NOTE: These are true numbers off of Dale's in-house dyno. The Holeshot compound is about 200 feet above sea level and
the dyno room stays a constant temperature between 70-80° F. The above results were also achieved with Dale's tuning,
which is a bonus!
Be aware that dynos, dyno operators, conditions and bikes can vary 3-8 HP, so these numbers should only be used as a reference.
These are true numbers measured on Dale's Dynojet 250 I dyno with WinPEP 7 Dyno Run Viewer, STD Mode, Smoothing 5.
Be aware that dynos, dyno operators, conditions and bikes can vary 3-8 HP, so these numbers should only be used as a reference.
These are true numbers measured on Dale's Dynojet 250 I dyno with WinPEP 7 Dyno Run Viewer, STD Mode, Smoothing 5.