Dale spent several months developing the FZ1 Holeshot stage 2 no air box jetting kit. He did over 200 dyno pulls and a month of road testing using two stock FZ1s during development. The Holeshot stage 2 FZ1 jetting kit gets totally rid of the air box. This allows the motor to really breath, developing big power and torque gains, as well as providing very easy access to the carbs. It also removes over 6 pounds of unnecessary weight. You can expect super smooth running with great throttle response throughout the entire rpm range. The Holeshot FZ1 stage 2 jetting kit will make about a 4 to 6 hp gain over other jetting kits on the market, using the standard air box, including Dale's own stage 1 mod kit.

The Holeshot FZ1 stage 2 jetting kit is totally complete, to make it user friendly for the home tuner, and a dyno is not needed for installation or set up. Dale personally works very closely with his customers, if any fine tuning help is needed.

The Holeshot kit includes, Dale's own fully adjustable 7075-T6 aluminum hard anodized needles, clips and mill spec shims for a half notch fine adjustment, three sets of original Mikuni main jets, original Mikuni pilot jets, stainless float bowl allen bolts, drill bit and pilot fuel plug removal screw, custom fabricated stainless battery tray holder, with hardware and foam backing, 3+ degree Holeshot timing advancer with cover gasket, original K&N dual oval air filters, K&N crank case vent filter with quality breather hose, cut to length and stainless hose clamps. Detailed easy to follow installation and tuning instructions are included with the kit.

Dale also offers a high altitude stage 2 kit if your located above 3000 feet elevation. This kit has slightly leaner main jets included.

Dale's FZ1 stage 2 jetting kit is really intend to be run with any slip-on or full system, but he can also help you tune it for a stock muffler if desired.

Click here to see a few installation tip photos

Click here to view before and after dyno charts

Click here to see FZ1 testing videos